MTS TECHNIK E36 COMFORT COILOVERS

Coilover Kit MTS Technik for BMW 3 Series / E36 Coupe, lowering both axles between 40 - 80 mm.

Dedicated for the years of: 10/91 - 05/99, for the engine version: 316i / 318is / 320i / 323i / 325i / 328i / M3 3.0 / M3 3.2.
 

FEATURES:

2 year warranty with no mileage limit to confirm high quality.

Suspension components characterized by increased corrosion resistance and made of the highest quality materials.

The use of twin-tube technology guarantees stable shock absorber performance.

Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.

Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.

The camber plates allow the wheel angle adjustment and increase the precision of driving.

Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.

Additional height adjustment at the bottom mounting, allowing the car's height reduction to be changed, without interfering with the spring operation characteristics.

Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.

Coilover springs made by Eibach, the world leader in the sport springs industry.

SPECS:

Max. Axle Load FA: 920 kg

Max. Axle Load RA: 1220 kg

Lowering FA: 40 - 80 mm

Lowering RA: 40 - 80 mm

- Front and rear axle height adjustable (threaded shock absorber housing).

- During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers

- Independent height adjustment at the lower brackets on the front dampers.
- For models up to 06/92 it is necessary to change the top mounts from vehicles manufactured after 06/92.s manufactured after 06/92.

- For models up to 11/91 and M3 - the shortened sway bar link MTSLS08 shall be purchased separately.